DW-035D Metal Wire Direct Electrolysis Copper Plating Stabilizer Instructions
The addition of DW-035D welding wire high-speed copper plating stabilizer can quickly form an electrochemically deposited copper plating layer under the condition of energizing the steel matrix, so that a dense copper layer can be quickly formed on the surface of the substrate, thereby isolating the direct contact between the acid plating solution and the substrate, so that the replacement reaction is completely stopped, and the copper plating layer has a firm bond.
Immersion copper film to facilitate the wire (pipe) drawing process. It can make the copper ions deposition in an orderly manner, make the copper deposition dense, strong adhesion, and at the same time, the increase of divalent iron is effectively inhibited, eliminating the trouble of frequent addition of copper sulfate, and the film weight of the copper film is 2-30g/m2.
The film thickness can be adjusted, and the thickness can be increased by increasing the copper sulfate, and the thickness can be increased by increasing the current.
DW-035D high-speed copper plating stabilizer performs cyanide-free acid copper plating on steel substrates, which is especially suitable for continuous plating.
It can be used as a base layer to replace semi-bright nickel or watt nickel or cyanidation, alkali copper plating.
The thickness of the copper plating layer can be adjusted between 0.1-200μm, and it does not contain cyanide, and the wastewater is easy to treat and has little pollution to the environment.
1. Process ratio
Name of the chemical Range Optimal value
Copper sulfate pentahydrate 150-220g/l 200g/l
Sulfuric acid (industrial) 30-50 g/ 40g/l
DW-035D Welding Wire High Speed Copper Plating Stabilizer 3-10 g/l 5g/l
Working Value:
Parameter Range Ideal Value
Cathode current density: 10-30A/dm2 20A/dm2
Temperature 15--50°C 30°C
Time 0.05-1 sec 0.2 sec,
Anode: titanium blue phosphor copper block: plating speed: 15-30 m/s
2. Supplementary method
KAH (Thousand Ampere-Hours) must be added with DW-035D direct electroplating copper stabilizer 30-100g, or 10-30g per ton of welding wire
The addition of DW-035D welding wire high-speed copper plating stabilizer can quickly form an electrochemically deposited copper plating layer under the condition of energizing the steel matrix, so that a dense copper layer can be quickly formed on the surface of the substrate, thereby isolating the direct contact between the acid plating solution and the substrate, so that the replacement reaction is completely stopped, and the copper plating layer has a firm bond.
Immersion copper film to facilitate the wire (pipe) drawing process. It can make the copper ions deposition in an orderly manner, make the copper deposition dense, strong adhesion, and at the same time, the increase of divalent iron is effectively inhibited, eliminating the trouble of frequent addition of copper sulfate, and the film weight of the copper film is 2-30g/m2.
The film thickness can be adjusted, and the thickness can be increased by increasing the copper sulfate, and the thickness can be increased by increasing the current.
DW-035D high-speed copper plating stabilizer performs cyanide-free acid copper plating on steel substrates, which is especially suitable for continuous plating.
It can be used as a base layer to replace semi-bright nickel or watt nickel or cyanidation, alkali copper plating.
The thickness of the copper plating layer can be adjusted between 0.1-200μm, and it does not contain cyanide, and the wastewater is easy to treat and has little pollution to the environment.
1. Process ratio
Name of the chemical Range Optimal value
Copper sulfate pentahydrate 150-220g/l 200g/l
Sulfuric acid (industrial) 30-50 g/ 40g/l
DW-035D Welding Wire High Speed Copper Plating Stabilizer 3-10 g/l 5g/l
Working Value:
Parameter Range Ideal Value
Cathode current density: 10-30A/dm2 20A/dm2
Temperature 15--50°C 30°C
Time 0.05-1 sec 0.2 sec,
Anode: titanium blue phosphor copper block: plating speed: 15-30 m/s
2. Supplementary method
KAH (Thousand Ampere-Hours) must be added with DW-035D direct electroplating copper stabilizer 30-100g, or 10-30g per ton of welding wire
