黑苹果吧 关注：143,372贴子：399,244
- 42回复贴，共1页
不感兴趣
开通SVIP免广告
Booting macOS Ventura Developer Beta 1 on the 2010 Mac Pro
Resources required:
macOS 13 InstallAssistant (Installer): http://swcdn.apple.com/content/down...3xjgyznf6415vin9xv7a6ws5/InstallAssistant.pkg
M1 build of os.dmg disk image loaded onto a USB drive: https://drive.google.com/uc?export=download&id=12vCE0MAzcRqN7zJu5EbbzsZeroeI_Gsm
Modified OCLP EFI linked in the OpenCore on Mac Pro post (or at least the APFS Patch under Kernel -> Patch)
Option 1:
1. You'll want to get macOS Ventura installed on a Haswell+ machine. Once you reach the desktop, reboot to the recovery environment.
2. From the recovery, you can open up a terminal window and mount the fresh install's preboot volume (diskutil list, diskutil mount disk#s#)
3. Once you get the preboot mounted, you'll want to navigate to /Volumes/Preboot/Long-UUID(check this using ls)/cryptex1/current/
4. Run an ls command here, and you should see the os.dmg file
5. Now run a cp command and replace the Preboot's os.dmg with the M1 os.dmg (should be on your USB drive)
6. Shut down your Haswell+ Mac and swap the Ventura drive into your cMP. Ventura should now boot!
Option 2:
1. You'll want to get Ventura "installed" onto your CMP. macOS will eventually stall at a point during the verbose portion of the first "installed" boot.
2. Once macOS stalls, reboot and ensure that macOS is still stalled.
3. Then you can reboot again into the recovery environment
4. From the recovery, you can open up a terminal window and mount the fresh install's preboot volume (diskutil list, diskutil mount disk#s#)
5. Once you get the preboot mounted, you'll want to navigate to /Volumes/Preboot/Long-UUID(check this using ls)/cryptex1/current/
6. Run an ls command here, and you should see the os.dmg file
7. Now run a cp command and replace the Preboot's os.dmg with the M1 os.dmg (should be on your USB drive)
8. Once that's done, reboot your machine and Ventura should boot to either a loading bar at ~60% with a cursor or a grey screen with a beachball.
9. Now you'll need to remove the Ventura drive from your cMP and install it/boot from it in another mac that is Ivy Bridge+.
This is done because the Ventura setup assistant does not play well with Non-AVX1 machines
Once you get through the Ventura Setup assistant, remove the drive and reinstall it in your cMP
10. If all things go to plan, you should boot into the Ventura desktop!
Reactions:feroxe2k22, andyapple123, ddhhddhh2 and 15 others
Resources required:
macOS 13 InstallAssistant (Installer): http://swcdn.apple.com/content/down...3xjgyznf6415vin9xv7a6ws5/InstallAssistant.pkg
M1 build of os.dmg disk image loaded onto a USB drive: https://drive.google.com/uc?export=download&id=12vCE0MAzcRqN7zJu5EbbzsZeroeI_Gsm
Modified OCLP EFI linked in the OpenCore on Mac Pro post (or at least the APFS Patch under Kernel -> Patch)
Option 1:
1. You'll want to get macOS Ventura installed on a Haswell+ machine. Once you reach the desktop, reboot to the recovery environment.
2. From the recovery, you can open up a terminal window and mount the fresh install's preboot volume (diskutil list, diskutil mount disk#s#)
3. Once you get the preboot mounted, you'll want to navigate to /Volumes/Preboot/Long-UUID(check this using ls)/cryptex1/current/
4. Run an ls command here, and you should see the os.dmg file
5. Now run a cp command and replace the Preboot's os.dmg with the M1 os.dmg (should be on your USB drive)
6. Shut down your Haswell+ Mac and swap the Ventura drive into your cMP. Ventura should now boot!
Option 2:
1. You'll want to get Ventura "installed" onto your CMP. macOS will eventually stall at a point during the verbose portion of the first "installed" boot.
2. Once macOS stalls, reboot and ensure that macOS is still stalled.
3. Then you can reboot again into the recovery environment
4. From the recovery, you can open up a terminal window and mount the fresh install's preboot volume (diskutil list, diskutil mount disk#s#)
5. Once you get the preboot mounted, you'll want to navigate to /Volumes/Preboot/Long-UUID(check this using ls)/cryptex1/current/
6. Run an ls command here, and you should see the os.dmg file
7. Now run a cp command and replace the Preboot's os.dmg with the M1 os.dmg (should be on your USB drive)
8. Once that's done, reboot your machine and Ventura should boot to either a loading bar at ~60% with a cursor or a grey screen with a beachball.
9. Now you'll need to remove the Ventura drive from your cMP and install it/boot from it in another mac that is Ivy Bridge+.
This is done because the Ventura setup assistant does not play well with Non-AVX1 machines
Once you get through the Ventura Setup assistant, remove the drive and reinstall it in your cMP
10. If all things go to plan, you should boot into the Ventura desktop!
Reactions:feroxe2k22, andyapple123, ddhhddhh2 and 15 others
今天是用的小本子，不方便，改天用图片，看还吞得下不 以下为原贴的翻译：
修改了 Mac Pro 上的 OpenCore 帖子中链接的 OCLP EFI（或至少是内核 -> 补丁下的 APFS 补丁）
选项 1：
1.您需要在 Haswell+ 机器上安装 macOS Ventura。到达桌面后，重新启动到恢复环境。
2. 在恢复中，您可以打开终端窗口并挂载全新安装的预引导卷（diskutil 列表、diskutil 挂载磁盘#s#）
3.挂载预引导后，您需要导航到 /Volumes/Preboot/Long-UUID（使用 ls 检查此操作）/cryptex1/current/
4。在此处运行 ls 命令，您应该会看到 os.dmg 文件
5。现在运行 cp 命令并将 Preboot 的os.dmg替换为 M1 os.dmg（应该在您的 USB 驱动器上）
6。关闭 Haswell+ Mac 并将 Ventura 驱动器换成 cMP。文图拉现在应该启动了！
选项 2：
1.您需要将 Ventura “安装”到您的 CMP 上。macOS 最终会在第一次“安装”启动的详细部分停止。
2. macOS 停止后，重新启动并确保 macOS 仍处于停止状态。
3. 然后，您可以再次重新启动到恢复环境
4.在恢复中，您可以打开终端窗口并挂载全新安装的预引导卷（diskutil list、diskutil mount disk#s#）
5.挂载预引导后，您需要导航到 /Volumes/Preboot/Long-UUID（使用 ls 检查此操作）/cryptex1/current/
6。在此处运行 ls 命令，您应该会看到 os.dmg 文件
7。现在运行 cp 命令并将 Preboot 的os.dmg替换为 M1 os.dmg（应该在您的 USB 驱动器上）
8。完成后，重新启动您的机器，Ventura 应该会用光标引导到 ~60% 的加载栏或带有沙滩球的灰色屏幕。
9. 现在，您需要从 cMP 中移除 Ventura 驱动器，然后在另一台 Ivy Bridge+ Mac 中安装/启动它。
这样做是因为 Ventura 设置助手不能很好地与非 AVX1 机器
配合使用 通过 Ventura 设置助手后，取出驱动器并将其重新安装到 cMP
10 中。如果一切按计划进行，您应该启动到 Ventura 桌面！
修改了 Mac Pro 上的 OpenCore 帖子中链接的 OCLP EFI（或至少是内核 -> 补丁下的 APFS 补丁）
选项 1：
1.您需要在 Haswell+ 机器上安装 macOS Ventura。到达桌面后，重新启动到恢复环境。
2. 在恢复中，您可以打开终端窗口并挂载全新安装的预引导卷（diskutil 列表、diskutil 挂载磁盘#s#）
3.挂载预引导后，您需要导航到 /Volumes/Preboot/Long-UUID（使用 ls 检查此操作）/cryptex1/current/
4。在此处运行 ls 命令，您应该会看到 os.dmg 文件
5。现在运行 cp 命令并将 Preboot 的os.dmg替换为 M1 os.dmg（应该在您的 USB 驱动器上）
6。关闭 Haswell+ Mac 并将 Ventura 驱动器换成 cMP。文图拉现在应该启动了！
选项 2：
1.您需要将 Ventura “安装”到您的 CMP 上。macOS 最终会在第一次“安装”启动的详细部分停止。
2. macOS 停止后，重新启动并确保 macOS 仍处于停止状态。
3. 然后，您可以再次重新启动到恢复环境
4.在恢复中，您可以打开终端窗口并挂载全新安装的预引导卷（diskutil list、diskutil mount disk#s#）
5.挂载预引导后，您需要导航到 /Volumes/Preboot/Long-UUID（使用 ls 检查此操作）/cryptex1/current/
6。在此处运行 ls 命令，您应该会看到 os.dmg 文件
7。现在运行 cp 命令并将 Preboot 的os.dmg替换为 M1 os.dmg（应该在您的 USB 驱动器上）
8。完成后，重新启动您的机器，Ventura 应该会用光标引导到 ~60% 的加载栏或带有沙滩球的灰色屏幕。
9. 现在，您需要从 cMP 中移除 Ventura 驱动器，然后在另一台 Ivy Bridge+ Mac 中安装/启动它。
这样做是因为 Ventura 设置助手不能很好地与非 AVX1 机器
配合使用 通过 Ventura 设置助手后，取出驱动器并将其重新安装到 cMP
10 中。如果一切按计划进行，您应该启动到 Ventura 桌面！
最后一瞬间，然后就黑屏几秒，然后背光亮了，硬盘灯也会闪，macos12到这基本快进桌面了不感兴趣
开通SVIP免广告
