AGE_FAULT_IN_NONPAGED_AREA (50)Invalid system memory was referenced. This cannot be protected by try-except.Typically the address is just plain bad or it is pointing at freed memory.Arguments:Arg1: fffffffffffffff8, memory referenced.Arg2: 0000000000000000, X64: bit 0 set if the fault was due to a not-present PTE.bit 1 is set if the fault was due to a write, clear if a read.bit 3 is set if the processor decided the fault was due to a corrupted PTE.bit 4 is set if the fault was due to attempted execute of a no-execute PTE.- ARM64: bit 1 is set if the fault was due to a write, clear if a read.bit 3 is set if the fault was due to attempted execute of a no-execute PTE.Arg3: fffff800386c3bb4, If non-zero, the instruction address which referenced the bad memoryaddress.Arg4: 0000000000000002, (reserved)Debugging Details:------------------
电脑故障吧 关注：610,559贴子：5,497,814
- 5回复贴，共1页
***** Kernel symbols are WRONG. Please fix symbols to do analysis.**************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_IMAGE_DOS_HEADER ****** ******************************************************************************************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_IMAGE_DOS_HEADER ****** ******************************************************************************************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_IMAGE_DOS_HEADER ****** ******************************************************************************************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_IMAGE_DOS_HEADER ****** ****************************************************************************
不感兴趣
开通SVIP免广告
KEY_VALUES_STRING: 1 Key : AV.Type Value: Read Key : Analysis.CPU.mSec Value: 15 Key : Analysis.Elapsed.mSec Value: 8956 Key : Analysis.IO.Other.Mb Value: 3 Key : Analysis.IO.Read.Mb Value: 0 Key : Analysis.IO.Write.Mb Value: 5 Key : Analysis.Init.CPU.mSec Value: 124 Key : Analysis.Init.Elapsed.mSec Value: 48551 Key : Analysis.Memory.CommitPeak.Mb Value: 69 Key : Bugcheck.Code.LegacyAPI Value: 0x50 Key : Bugcheck.Code.TargetModel Value: 0x50 Key : Dump.Attributes.AsUlong Value: 1008 Key : Dump.Attributes.DiagDataWrittenToHeader Value: 1 Key : Dump.Attributes.ErrorCode Value: 0 Key : Dump.Attributes.KernelGeneratedTriageDump Value: 1 Key : Dump.Attributes.LastLine Value: Dump completed successfully. Key : Dump.Attributes.ProgressPercentage Value: 0 Key : Failure.Bucket Value: WRONG_SYMBOLS_X64_10.0.22621.3447_(WinBuild.160101.0800)_TIMESTAMP_950923-001656_EC7C6578_nt_wrong_symbols!EC7C65781047000 Key : Failure.Hash Value: {6ea35805-8f0d-8c48-25c3-94a610727ca5}BUGCHECK_CODE: 50BUGCHECK_P1: fffffffffffffff8BUGCHECK_P2: 0BUGCHECK_P3: fffff800386c3bb4BUGCHECK_P4: 2FILE_IN_CAB: 042024-5937-01.dmpADDITIONAL_DEBUG_TEXT: You can run '.symfix; .reload' to try to fix the symbol path and load symbols.WRONG_SYMBOLS_TIMESTAMP: ec7c6578WRONG_SYMBOLS_SIZE: 1047000FAULTING_MODULE: fffff80036a00000 ntDUMP_FILE_ATTRIBUTES: 0x1008 Kernel Generated Triage DumpREAD_ADDRESS: **************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_MMPFN ****** ******************************************************************************************************************************************************** ****** ****** Either you specified an unqualified symbol, or your debugger ****** doesn't have full symbol information. Unqualified symbol ****** resolution is turned off by default. Please either specify a ****** fully qualified symbol module!symbolname, or enable resolution ****** of unqualified symbols by typing ".symopt- 100". Note that ****** enabling unqualified symbol resolution with network symbol ****** server shares in the symbol path may cause the debugger to ****** appear to hang for long periods of time when an incorrect ****** symbol name is typed or the network symbol server is down. ****** ****** For some commands to work properly, your symbol path ****** must point to .pdb files that have full type information. ****** ****** Certain .pdb files (such as the public OS symbols) do not ****** contain the required information. Contact the group that ****** provided you with these symbols if you need this command to ****** work. ****** ****** Type referenced: nt!_MMPTE ****** ****************************************************************************Unable to get size of nt!_MMPTE - probably bad symbols fffffffffffffff8 MM_INTERNAL_CODE: 2BLACKBOXBSD: 1 (!blackboxbsd)BLACKBOXNTFS: 1 (!blackboxntfs)BLACKBOXPNP: 1 (!blackboxpnp)BLACKBOXWINLOGON: 1CUSTOMER_CRASH_COUNT: 1STACK_TEXT: ffffb082`e313e718 fffff800`36eb240e : 00000000`00000050 ffffffff`fffffff8 00000000`00000000 ffffb082`e313e940 : nt!KeBugCheckExffffb082`e313e720 fffff800`36c302dc : 00000000`00000000 00000000`00000000 00000000`00000000 ffffffff`fffffff8 : nt!MmIsNonPagedSystemAddressValid+0x4c93effffb082`e313e820 fffff800`36e295fa : ffffffff`ffffffff 00000000`00000008 00000000`00000001 00000000`0606b0ff : nt!ObfReferenceObject+0x19fcffffb082`e313e940 fffff800`386c3bb4 : fffff800`386e37ac ffffc688`e40fc020 ffffc688`e04f8c80 00000000`00000000 : nt!setjmpex+0x4ceaffffb082`e313ead8 fffff800`386e37ac : ffffc688`e40fc020 ffffc688`e04f8c80 00000000`00000000 00000000`00000000 : pdc!McTemplateK0puu_EtwWriteTransferffffb082`e313eae0 fffff800`386e3c42 : ffffd98f`0b3dab90 ffffb082`e313ebf1 00000000`00000000 ffffb082`e313f1a8 : pdc!PdcpPpmProcessScenarioStateChange+0xa4ffffb082`e313eb20 fffff800`38703ff2 : 00000000`41747645 00000000`00400001 00000000`00000000 ffffd98f`05000000 : pdc!PdcpPpmScenarioStart+0x42ffffb082`e313eb50 fffff800`38704144 : ffffd98f`18df9f40 ffffd98f`0b3dab90 ffffb082`e313f1a8 00000000`00000000 : CEA!EaiSignalAggregateEvent+0x132ffffb082`e313ec40 fffff800`387038dc : ffffd98f`0b3dab90 ffffd98f`202a5848 ffffb082`e313ee40 00000000`00000000 : CEA!EaiSignalCallback+0x9cffffb082`e313ed40 fffff800`38704563 : 00000000`00000000 00000000`00000000 ffffb082`e313f1a8 00000000`00000000 : CEA!EaiProcessNotification+0x338ffffb082`e313eee0 fffff800`3871026f : 00000000`c0000023 ffffb082`e313f109 00000000`00000000 ffffd98f`202a5840 : CEA!WnfEventCallback+0x1dfffffb082`e313f080 fffff800`3714900d : ffffffff`ffffffff 00000000`00000001 ffffffff`ffffffff ffffd98f`058d0388 : CEA!AggregateEventWnfCallback+0xcfffffb082`e313f160 fffff800`37148dd5 : 00000000`00000001 00000000`00000000 ffffd98f`0bb8b260 ffffd98f`0bb8b268 : nt!ExCreateCallback+0x45dffffb082`e313f1f0 fffff800`371de7d3 : 00000000`00000001 00000000`00000000 ffffd98f`0bb8b260 ffffd98f`0bb8b268 : nt!ExCreateCallback+0x225ffffb082`e313f220 fffff800`371ddfb6 : ffffd98f`0bb8b1f0 00000000`00000018 ffffb082`00000001 ffffc688`00000001 : nt!RtlDeleteAtomFromAtomTable+0x1bc3ffffb082`e313f290 fffff800`371ddcee : ffffc688`e94f45d0 00000000`00000000 00000000`00000005 00000000`00000000 : nt!RtlDeleteAtomFromAtomTable+0x13a6ffffb082`e313f3a0 fffff800`36e2d938 : 00000000`00000000 00000000`00800000 00000000`00000000 00000000`00000000 : nt!RtlDeleteAtomFromAtomTable+0x10deffffb082`e313f3f0 00007fff`96e32f14 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x9028000000f1`bf8ff3a8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007fff`96e32f14SYMBOL_NAME: nt_wrong_symbols!EC7C65781047000IMAGE_VERSION: 10.0.22621.3209STACK_COMMAND: .cxr; .ecxr ; kbEXCEPTION_CODE_STR: EC7C6578EXCEPTION_STR: WRONG_SYMBOLSPROCESS_NAME: ntoskrnl.wrong.symbols.exeIMAGE_NAME: ntoskrnl.wrong.symbols.exeMODULE_NAME: nt_wrong_symbolsFAILURE_BUCKET_ID: WRONG_SYMBOLS_X64_10.0.22621.3447_(WinBuild.160101.0800)_TIMESTAMP_950923-001656_EC7C6578_nt_wrong_symbols!EC7C65781047000OSPLATFORM_TYPE: x64OSNAME: Windows 10FAILURE_ID_HASH: {6ea35805-8f0d-8c48-25c3-94a610727ca5}Followup: MachineOwner---------
孩子看不懂
