我设置的是主面所在实体施加了刚体约束，从面是线弹性体，主面比从面小一圈，但文件里一直warning：
SLAVE NODE 2 INSTANCE ROLLER-1 WILL NOT BE TIED TO THE MASTER SURFACE ASSEMBLY_M_SURF-5. THE DISTANCE FROM THE MASTER SURFACE IS GREATER THAN THE POSITION TOLERANCE VALUE.
还有：FOR *TIE PAIR (ASSEMBLY_S_SURF-5-ASSEMBLY_M_SURF-5), ADJUSTED NODES WITH VERY SMALL ADJUSTMENTS WERE NOT PRINTED. SPECIFY *PREPRINT,MODEL=YES FOR COMPLETE PRINTOUT.
不能绑定，距离大于容差，这该怎么解决，有人说改改tie里的tolarance，也不知道改成多大合适，求大神指点
SLAVE NODE 2 INSTANCE ROLLER-1 WILL NOT BE TIED TO THE MASTER SURFACE ASSEMBLY_M_SURF-5. THE DISTANCE FROM THE MASTER SURFACE IS GREATER THAN THE POSITION TOLERANCE VALUE.
还有：FOR *TIE PAIR (ASSEMBLY_S_SURF-5-ASSEMBLY_M_SURF-5), ADJUSTED NODES WITH VERY SMALL ADJUSTMENTS WERE NOT PRINTED. SPECIFY *PREPRINT,MODEL=YES FOR COMPLETE PRINTOUT.
不能绑定，距离大于容差，这该怎么解决，有人说改改tie里的tolarance，也不知道改成多大合适，求大神指点
