<hw_cli_init.c:178>Set Module Bin Path:/mnt/jffs2/equipment/bin
<hw_cli_init.c:194>pcNewEnvStr:/mnt/jffs2/equipment/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/local/sbin:/usr/osgi/bin
<hw_cli_init.c:211>Set Module Library Path:/mnt/jffs2/equipment/lib
<hw_cli_init.c:227>pcNewEnvStr:/mnt/jffs2/equipment/lib:/lib:/lib/omci_module:/lib/oam_module:/usr/osgi/lib:/usr/osgi/lib/arm:/usr/osgi/lib/arm/jli:/usr/osgi/lib/arm/minimal
HW_CLI_InitUserInfo: bFlag=0, uiEncrypt=3
BusyBox v1.18.4 (2016-04-17 22:20:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.WAP(Dopra Linux) #
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.Login:[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.BBSP.DdnsDebug
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.SSP.ShowProtocolStatistic
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.SSP.ClearProtocolStatistic
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.EthPort.PolicyStats.AddPortPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.EthPort.PolicyStats.DelPortPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.EthPort.PolicyStats.ClearPortPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.EthPort.PolicyStats.GetPortPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.Pon.PolicyStats.AddPonPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.Pon.PolicyStats.DelPonPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.Pon.PolicyStats.ClearPonPolicyStats
[HW_CLI_IsSupportRegCmd]Error1 pcPath=InternetGatewayDevice.X_HW_DEBUG.WAP_AMP.Pon.PolicyStats.GetPonPolicyStats
<hw_cli_init.c:3935>Init CmdTree From:/mnt/jffs2/equipment/wap/hw_cli.xml
<hw_cli_init.c:3935>Init CmdTree From:/mnt/jffs2/equipment/wap/hw_diag_cli.xml
<hw_cli_init.c:3935>Init CmdTree From:/mnt/jffs2/equipment/wap/hw_shell_cli.xml
kmsgread exit!
Open device /dev/pts/2 OK!========================================================
Start run collect command:SHELL:uptime
uptime
08:52:44 up 29 min, load average: 3.27, 3.09, 2.63========================================================
Start run collect command:SHELL:free
free
total used free shared buffers
Mem: 503728 189312 314416 0 10056
-/+ buffers: 179256 324472
Swap: 0 0 0========================================================
Start run collect command:SHELL:cat /proc/meminfo
cat /proc/meminfo
MemTotal: 503728 kB
MemFree: 314440 kB
Buffers: 10056 kB
Cached: 42056 kB
SwapCached: 0 kB
Active: 97904 kB
Inactive: 42712 kB
Active(anon): 89316 kB
Inactive(anon): 2436 kB
Active(file): 8588 kB
Inactive(file): 40276 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 88540 kB
Mapped: 23120 kB
Shmem: 3248 kB
Slab: 10672 kB
SReclaimable: 2408 kB
SUnreclaim: 8264 kB
KernelStack: 2224 kB
PageTables: 1856 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 251864 kB
Committed_AS: 1341916 kB
VmallocTotal: 516096 kB
VmallocUsed: 160832 kB
VmallocChunk: 294968 kB========================================================
Start run collect command:SHELL:wap.ssp.ps
wap.ssp.ps
PID TID CPU VmSize Stat Prio Policy U-Time S-Time Command WChan
1 1 0 356k S 120 0 0 150 init hrtimer_nanosle
2 2 0 0k SW 120 0 0 1 kthreadd kthreadd
3 3 0 0k SW 120 0 0 9 ksoftirqd/0 smpboot_thread_
4 4 0 0k SW 120 0 0 608 kworker/0:0 worker_thread
5 5 0 0k SW 100 0 0 0 kworker/0:0H worker_thread
6 6 0 0k SW 120 0 0 6 kworker/u8:0 worker_thread
7 7 0 0k SW 0 1 0 0 migration/0 smpboot_thread_
8 8 0 0k SW 120 0 0 0 rcu_bh rcu_gp_kthread
9 9 0 0k SW 120 0 0 2 rcu_sched rcu_gp_kthread
10 10 0 0k SW 0 1 0 0 watchdog/0 smpboot_thread_
11 11 0 0k SW 100 0 0 0 khelper rescuer_thread
12 12 0 0k SW 120 0 0 1 kworker/u8:1 worker_thread
101 101 0 0k SW 100 0 0 0 writeback rescuer_thread
104 104 0 0k SW 100 0 0 0 bioset rescuer_thread
105 105 0 0k SW 100 0 0 0 crypto rescuer_thread
107 107 0 0k SW 100 0 0 0 kblockd rescuer_thread
119 119 0 0k SW 100 0 0 0 cfg80211 rescuer_thread
135 135 0 0k SW 100 0 0 0 rpciod rescuer_thread
140 140 0 0k SW 120 0 0 0 khungtaskd watchdog
141 141 0 0k SW 120 0 0 0 kswapd0 kswapd
189 189 0 0k SW 120 0 0 0 fsnotify_mark fsnotify_mark_d
192 192 0 0k SW 100 0 0 0 nfsiod rescuer_thread

故障诊断太长了 发不上来

另外，有没有和我一样情况的啊，我是山东联通。一直怀疑是联通机房的手脚，只是不懂原理啊。当时的TR069也没关，不知道有没有关联。

@老周部落 能否解惑？

几天没用sa1456c了，刚刚想下东西就重新插上试了下，竟然可以上网，但是没有几分钟网页开始打不开了，用联通的一个软件测试一下发现只有上行速度，下行是0.
哎，这个是个啥问题啊，难道就是光猫自身改双模的问题？可是我联系卖家，被告知这款原生的华为固件本来就是支持双模的，光猫自身不存在问题。我可真郁闷了！
扩展坞还没到，之能等到了查下原光猫是不是有被重新下发改了什么数据，@老周部落 有没有这个可能呢？

这是换回旧猫百兆口的速率

真郁闷 早知道不入sa1456c了，还这么打 弱电箱都放不进去！

有点乱，不过主要信息是再sa1456c的配置