发文实例【GPS配置】使用本配置：GPS导航软件后电信卡3G能上网。

修改了卫星服务器的/system/etc/gps.conf配置文件如下：
#Test
NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
# NTP_SERVER=north-america.pool.ntp.org NTP_SERVER=3.cn.pool.ntp.org
NTP_SERVER=0.cn.pool.ntp.org
NTP_SERVER=1.cn.pool.ntp.org
NTP_SERVER=2.cn.pool.ntp.org
NTP_SERVER=0.asia.pool.ntp.org
NTP_SERVER=1.asia.pool.ntp.org
NTP_SERVER=2.asia.pool.ntp.org
NTP_SERVER=3.asia.pool.ntp.org XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL = 3 # Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0 # supl version 1.0
SUPL_VER=0x10000 # Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0 # GPS Capabilities bit mask
# SCHEDULING = 1
# MSB = 2
# MSA = 4
# ULP = 0x20
# default = MSA | MSB | SCHEDULING | ULP
CAPABILITIES=0x27 # Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000 ################################
##### AGPS server settings #####
################################ # FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234 SUPL_HOST=suplcn.sirf.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276 # FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234 ################################
# Sensor Settings
################################ # Needs to be set explicitly based on sensor
# There is no default value.
#GYRO_BIAS_RANDOM_WALK= SENSOR_ACCEL_BATCHES_PER_SEC=2
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
SENSOR_GYRO_BATCHES_PER_SEC=2
SENSOR_GYRO_SAMPLES_PER_BATCH=5 # Sensor Control Mode (0=AUTO, 1=FORCE_ON)
SENSOR_CONTROL_MODE=0 # Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
SENSOR_USAGE=0 # Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
SENSOR_PROVIDER=1 ################################
# Indoor Positioning Settings
################################
# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
QUIPC_ENABLED = 0 ################################
# EXTRA SETTINGS
################################
# Enable or Disable Wiper (1=Enable, 0=Disable)
ENABLE_WIPER=1 ####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE
LPP_PROFILE = 0
(完)修改完了，permisions修改为WR-R--R--或者root系统权限。